Siemens Gigaset 2010 - Manual (Page 26)

Operating modes
16
KAP04.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619
Signaling method
The PTT operates telephone connections with two differ-
ent signaling methods:
● Dial pulsing (DP)
● Dual-tone multifrequency signaling (DTMF)
The factory default setting for your Gigaset 2010 is
DTMF.
Checking the signaling method of your telephone line
Setting the signaling method
c Press the off-hook key. You will hear the dial tone.
o
Press any digit, e.g. 2. If you still hear the same dial tone,
you must switch the signaling method to dial pulsing
(DP).
B
#1 Start the setting procedure.
o
Enter the four-digit base code (factory default: “0000“)
(➔ page 19).
O
033
B Set to dial pulsing (DP).
or
O
037
B Set to DTMF/Flash (factory default).