Siemens Gigaset 2010 - Manual (Page 60)

Registering/de-registering more than one handsets at the base station
50
KAP15.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619
De-registering a handset from a base station
o
#
Enter four-digit base code (➔ page 19) (factory default:
“0000“) und then press # . The remaining available in-
ternal numbers are shown on the display:
:
2
...
6 Enter one of the available internal numbers. The handset
is now registered.
2 3 4 5 6
f
N
b
(Example: 2,3,4 ,5 and 6
are available)
B # 7 2 Start setting procedure.
o
Enter the four-digit base code (factory default:”0000“)
(➔ page 19). All registered handsets are shown on the
display.
o B Enter the internal call number of the desired handset (1
to 6) and confirm by pressing B .