Siemens Gigaset 2010 - Manual (Page 51)

The Gigaset 2010 lock functions
41
KAP13.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619
The Gigaset 2010 lock functions
Activating/deactivating the Gigaset 2010 lock for outgoing calls
It is possible to lock the Gigaset 2010 for outgoing calls.
If emergency numbers are stored, they can be dialed even
if the lock is active.
It is possible to receive calls while the lock function is on.
The factory default for this function is deactivated.
Emergency calls when the Gigaset 2010 is locked
Emergency calls can be dialed
● even if the Gigaset 2010 is locked for outgoing calls
(➔ page 41), or
● if the handset is only set for “outward-restricted trunk
access” (➔ page 45).
You can program four emergency call numbers.
Emergency call numbers can have up to 16 digits.
You can also lock individual handsets for out-
going external calls (➔ page 46).
B # 2 4 Start the setting procedure.
o Enter the four-digit system code (factory default “0000“).
1
B Switch on the lock.
or
0 B Switch off the lock.