Siemens Gigaset 2010 - Manual (Page 56)

Lock functions on the handset
46
KAP14.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619
Lock functions on the handset
Activating/deactivating the handset lock
You can lock your handset for outgoing external calls to
protect it against unauthorized use.
If a DSS number is stored on the handset, it can still be
dialed if the lock function is on. A preprogramed emergen-
cy number (➔ page 41) can also be dialed when the hand-
set is locked.
It is possible to accept calls on a locked handset.
DSS number for handset lock
You can store one DSS number which can be dialed when
the handset is locked. The DSS number can be a number
where you can be reached in your absence.
A DSS number must be stored before acti-
vating the handset lock.
B
8 1 Start procedure for switching on the lock.
or
B 8 0 Start procedure for switching off the lock.
o
Enter the handset PIN (factory default “0000 “).
(➔ page 20).
B Switch the handset lock on or off. If the handset is
locked, you will see a key on the display.
You can lock the Gigaset 2010 for outgoing ex-
ternal calls (➔ page 41).
The DSS number must not be the same as a
barred number (➔ page 41).
The DSS number cannot be dialed from a locked
handset,
● if “outward-restricted trunk access” is set
(➔ page 45), or
● if the Gigaset 2010 lock is activated
(➔ page 45).
● If the Gigaset 2010 lock is activated, it is only
possible to dial emergency numbers.
Exception: DSS number = emergency
number.