Siemens Gigaset 2010 User Manual
Page 19
Notes on operation
9
Kap03.fm5
18.11.98
Gigaset 2010, UEB/engl.: A30852-X1100-E301-3-7619
Technical data
Standard:
DECT = Digital Enhanced Cordless Telecommunications
GAP = Generic Access Profile (standard adhered to
by most manufacturers for DECT radio trans-
mission)
Number of channels:
120 duplex channels
Radio frequency range:
1880 MHz to 1900 MHz
Duplex method:
Time-division multiplexing, 10 ms frame length
Channel grid:
1728 kHz
Bit rate:
1152 kbit/s
Modulation:
GFSK
Voice coding:
32 kbit/s
Transmitted power:
10 mW, average output per channel
Range:
up to 300 m outdoors,
up to 50 m in buildings
Base station power supply:
220/230V (AC adapter)
Base station power consumption:
In standby mode and when the telephone is in use ap-
prox. 3 W, during charging approx. 5 W
Handset operating times
(with fully charged battery):
In standby mode with NiCd
NiMH, 1100 mAh
NiMH, 1300 mAh
When the telephone is in use with
NiCd
with NiMH, 1100 mAh
with NiMH, 1300 mAh
up to 70 hours
up to 110 hours
up to 130 hours
up to 7 hours
up to 11 hours
up to 13 hours
Charging time in base station:
NiCd rechargeable batteries (approx. 4–5 hours)
NiMH rechargeable batteries, 1100 mAh (approx. 8–9
hours)
Permitted ambient conditions
for operation:
+5 °C to +45 °C
20 % to 75 % relative humidity
Signaling method:
DP (dial pulsing) / DTMF (dual tone multifrequency)
Signal key function:
Flash
Base station dimensions:
approx. 146 x 117 x 70 mm (L x W x H)
Handset dimensions:
approx. 160 Ч 55 Ч 25 mm (L × W × H)