Siemens Gigaset 2010 - Manual (Page 34)

External outgoing calls
24
KAP06.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619
External outgoing calls
Calling external subscribers
You will hear the ring tone.
Dialing with call number checking (en-bloc dialing)
En-bloc dialing allows you to check the external call num-
ber entered before it is dialed and correct it, if necessary,
using the
Q
key before the line is seized.
c Press the off-hook key. You will hear the dial tone.
o
Enter the desired call number on the dialling keypad. The
number you have entered is shown on the display, e.g.:
:
123456
f
N
b
F
The maximum length of call numbers that you
can enter is 22 digits.
o
Enter the desired call number. The number you have
entered is shown on the display, e.g.:
:
Q
You can correct the number entered using the Q key.
c Press the off-hook key within 30 seconds to seize the
line. The call number is dialed. You will then hear the ring
tone.
or
a
You can also leave the dialing mode without dialing by
pressing the on-hook key.
123456
f
N