Siemens Gigaset 4000 - Manual

Gigaset 4000
Quick Start Guide
This guide will help you get started using your
Gigaset handset. For additional information related
to your model, please refer to the User Manual.
FCC Information
This telephone system equipment has been tested and found to comply with the limits
for Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
These limits are designed to provide reasonable protection against harmful interference
in a residential installation. Some cordless telephones operate at frequencies that may
cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the
system base should NOT be placed near or on top of a TV or VCR; and, if interference is
experienced, moving the base farther away from the TV or VCR will often reduce or eliminate
the interference.
However, there is no guarantee that interference will not occur in a particular installation.
If this telephone system does cause harmful interference to radio or television reception,
which can be determined by turning the system off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
(1) Increase the separation between the base station and receiver;
(2) Connect the base station to an outlet on a circuit different from that to which the
receiver is connected;
(3) Consult the dealer or an experienced radio TV technician for help.
Notice to Hearing Aid Wearers: This phone system is compatible with inductively
coupled hearing aids.
Power Outage: In the event of a power outage, your cordless telephone will not operate.
The cordless telephone requires electricity for operation. You should have a telephone
that does not require electricity available for use during power outages.
Safety Precautions: Before using your telephone equipment, basic safety instructions
should always be followed to reduce the risk of fire, electric shock, and injury to persons.
Contains Nickel Cadmium Battery. Battery must be recycled or disposed of properly. Do
not dispose in municipal waste. Only use type AA Nickel-Cadmium (NiCd) or type AA
Nickel-Metal Hydride (NiMH) rechargeable batteries in the cordless handset. Do not use
Alkaline or lithium batteries in the cordless handset or charger. Do not mix old and new
batteries. Use the same rechargeable battery type. Do not combine rechargeable battery
types. Exercise care in handling batteries in order not to short the batteries with conducting
materials such as rings, bracelets, and keys. The batteries or conduction materials may
overheat and cause burns or fire. Do not dispose batteries in fire. For additional instructions,
see the user’s manual included with your Gigaset system.
The installation of the base unit should allow at least 8-inches between the base and
persons to be in compliance with FCC RF exposure guidelines.
Warranty: The product warranty is contained in the user’s manual. Please refer to the
manual for complete product warranty details.
Information subject to change as Siemens reserves the right, without notice, to make changes in equipment
design or components. Siemens is a registered trademark and Gigaset is a trademark of Siemens AG.
Made in Germany. © Siemens Information and Communication Mobile, LLC 2001 Copyright. All rights reserved.
PB4000HSG
Back of
Charger
Bottom of
Charger
Connecting the Charger
A charger is included with additional handsets. This charger does not
require connection to a telephone line for operation. Use only the power
supply (110 VAC/60 Hz with cord) included with the charger. (Do not use
other power supplies.)
Before using your charger, follow these steps:
1
Insert small plug
on cord into
back of charger.
2
Turn small plug to the
left and place cord in
cable channel on
bottom of charger.
3
Insert power
supply into
wall outlet.
IMPORTANT: Do not use a wall outlet controlled by a wall switch.
May be wall mounted
using two small screws
(not provided)
Customer Care: 1-888-777-0211
Or visit our Website: www.icm.siemens.com
Visite nuestro sitio Web para obtener instrucciones en español.
DO NOT RETURN
THIS PRODUCT TO THE STORE!
Please read the following important information.
For Siemens Customer Care Service, product operation
information, or for problem resolution, call toll-free
1-888-777-0211
7 a.m. to 10 p.m. Central Standard Time EVERY DAY
www.icm.siemens.com
Visite nuestro sitio Web para obtener instrucciones en español.
Customer Care: 1-888-777-0211
Or visit our Website: www.icm.siemens.com
Visite nuestro sitio Web para obtener instrucciones en español.