Siemens Gigaset 2010 - Manual (Page 45)

Individual settings on the Gigaset 2000S mobile unit
35
Kap10.fm5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619
Setting the handset volume
The handset has three volume settings:
The factory default is level 1 (normal).
Activating/deactivating notification and warning tones
Activating/deactivating the key confirmation tone
If the tone is active, each keystroke is confirmed acousti-
cally. You can switch the key confirmation beep on (factory
default) or off.
Level 1 ... Level 3 = handset volume normal ... loud
This setting can also be adjusted during a call.
B 0 Start setting procedure. The following appears on your
display:
:
o B Insert the desired volume and save.
0 1
P f
N
(Example: handset volume
is set to 1)
The following appears on your display:
Volume 2
Volume 3
c
P f
N
cc
P f
N
B 3 1 Start setting procedure. The current setting is displayed:
31 1 = activated, 31 0 = deactivated.
1 B Activate the key confirmation tone.
or
0
B Deactivate the key confirmation tone.