Siemens Gigaset 2010 - Manual (Page 59)

Registering/de-registering more than one handsets at the base station
49
KAP15.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619
Registering/de-registering more than one handsets at the
base station
You can operate up to six handsets from the Gigaset 2000
family at a Gigaset 2010 base station.
The handset supplied with your telephone is already re-
gistered at the base station with the internal call number
1 and base number 1.
Each additional handset that you purchase must be regi-
stered at the base station. We recommend that when you
are registering other handsets at the base station, to keep
the base number 1 for this base station.
Registering a Gigaset 2000S handset at a base station
Prepare the base station
Register the handset
You can only register handsets from the Gigaset
family. It is not possible to register other Giga-
set handsets.
If you want to operate your handset at more
than one base station (up to six) (➔ page 51),
you must repeat the following procedure at
each base station.
The handset must be turned off (➔ page 15)
?
Press the base station paging key until you hear the logon
tone (after approximately ten seconds).
1
or 2,3,4 The handset is off. Press number of base station.
h Press also this key. The handset is on.
Examples: Registering
● Registering at a base station
Press 1 and h .
Station number
● Registering at a 2nd base station
Press 2 and h .
1
f
N