Siemens Gigaset 2010 - Manual (Page 35)

External outgoing calls
25
KAP06.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619
Manually inserting a pause
If you repeatedly get the busy symbol following automatic
dialing from the telephone directory, e.g. after the country
code, you can enter a pause (three seconds), e.g. bet-
ween the exchange or country code and the call number:
No answer or line busy
Redial
Repeating the last number dialed
You can call up a list with numbers for redial by pressing
the O key. You will be presented with a list of the last
numbers you called.
Redialling one of the last five numbers selected
Your Gigaset 2010 memorises the last five numbers
dialled. You can dial these five numbers without having
to re-enter them or you can correct them with the
Q key.
o O o
Press the O key. “P“ is shown on the display.
:
0043P123456
f
N
b
F
Replace the handset in the base station or charging unit.
The call is disconnected.
or
a Disconnect call (“on-hook“).
You can use the redial function to repeat this
call.
O Select the desired call number.
c Press the off-hook key. The number is dialed.
O Keep pressing the key until the required number appears
on the display of the mobile unit.
Q
Press the
Q
key to correct the number if necessary.
c The number is dialled. Ringing tone is then heard.