Siemens Gigaset 2010 - Manual (Page 53)

The Gigaset 2010 lock functions
43
KAP13.FM5 14.8.98 Gigaset 2010, UEB/engl.: A30852-X1100-E301-2-7619
Barred numbers for handsets
By storing barred numbers for each registered handset,
you can prevent certain external call numbers or types of
number from being dialed if the call number lock is acti-
vated (➔ page 44). Thus, for example, you can bar all call
numbers starting with 00 (international calls), and special
rate numbers, e.g. numbers starting with 0900.
You can store up to three barred numbers for each hand-
set. Barred numbers can have up to eight digits.
Displaying or storing barred numbers
B # 8 5 Start the setting procedure.
o
Enter the four-digit system code (factory default “0000“)
(➔ page 19). The registered handsets or their internal call
numbers are shown on the display:
:
o
Enter the internal call number of the desired handset
(1 to 6).
O Select the first barred number for the selected handset.
The barred number is shown on the display:
:
:
O Display the next barred number.
or
o
Enter a barred number for the displayed memory slot (1
to 3). If a barred number is already stored, the new
number overwrites the old one.
O Display the next barred number. The barred number you
entered is stored.
or
B End procedure.
1 2 3
P f
N
b
(Example: handsets 1, 2,
and 3 are registered)
1 z
P f
N
b
(1st example: no barred
number stored)
1 00
P f
N
b
(2nd example: barred
number 00 stored)
The barred numbers only take effect if the call
number lock is switched on.