Siemens sitrans LU01 - Manual (Page 47)

7ML19985BE02 SITRANS LU01 – INSTRUCTION MANUAL Page 41
m
mmmm
Pa
ra
m
e
te
rs
P101 High Alarm
Enter the High Alarm material level for the index displayed. .
P102 Low Alarm
Enter the Low Alarm material level for the index displayed. .
P103 High High Alarm
Enter the High High Alarm material level for the index displayed, (Relay Set Up 2 or 4
only).
P104 Low Low Alarm
Enter the Low Low Alarm material level for the index displayed, (Relay Set Up 3 or 4 only)..
Primary Index Relay
Values
Range: -999 to 9999
Preset 80.00% of Span or equivalent units
Primary Index Relay
Values
Range: -999 to 9999
Preset 20.00% of Span or equivalent units
Primary Index Relay
Values
Range: -999 to 9999
Preset 90.00% of Span or equivalent units
Primary Index Relay
Values
Range: -999 to 9999
Preset 10.00% of Span or equivalent units
Notes:
• OFF is displayed if the Relay Set Up (P100) selected does not use the Alarm
parameter accessed.
• Ch is displayed if a Custom Relay Parameter was previously operator altered.