Siemens sitrans LU01 - Manual (Page 33)

7ML19985BE02 SITRANS LU01 – INSTRUCTION MANUAL Page 27
m
mmmm
Pa
ra
m
e
te
rs
Parameter Reference
The SITRANS LU01 is configured through its parameters, and the application determines
the parameter values which are entered into the unit.
Please check your value entries carefully before operating the SITRANS LU01 to ensure
optimum performance.
Helpful Hints
Please note the following:
• Default values are always indicated with an asterix (*)
• Global values are common for all inputs and outputs on the unit
• Indexed parameters can apply to more than one relay
• Primary index relates to a relay
• Secondary index allows for multiple values on an indexed point
• View only parameters are for display only and cannot be altered. These parameters
are marked as view only in the Parameter values.
In PROGRAM mode
1. Press as required to underline the Parameter Number display field.
2. Key in the desired Parameter Number, (direct access) or press or as
required (scroll access).
(As preset, Quick Start Parameters, and previously altered parameters may be scroll
accessed ).
3. With the desired Parameter Number displayed, key in the desired Parameter Value
and press .
Notes:
• Record each Parameter Value alteration on the appropriate Programming
Chart for future reference,in case complete reprogramming is required.
• If Parameter Values cannot be altered, access the Lock parameter (P000) and
enter the security code (See Programming Security).