Programming the keys, Procedure for programming the keys – Siemens HIPATH 1190 User Manual

Page 96

Step by step

Miscellaneous Functions

Programming the Keys

The Key Programming feature allows an extension to

assign functions to a system telephone’s programma-

ble keys. This can also be accomplished using the Hi-

Path 1100 Manager application.

Procedure for programming the keys

Press this key.

Select and press to confirm.

Enter the code for programming a key.

Select a programmable key. If the key is already pro-

grammed for another function, this information will be

displayed.

Press to confirm.

All programmable features are shown. Select a feature

and press to confirm. For example, "CONFERENCE".

Optional

Select and press to confirm.

Some features (for example, "CALL FORWARDING or

NIGHT SERVICE") can be stored when incomplete. That

is, subsequently, after pressing a key to activate a fea-

ture, it may be necessary to complete the entry.

Press to confirm.

or If you make a mistake:

Select and press to confirm. The previous selection will

be deleted.

Press to exit.

Select and press to confirm.

[1] For system telephones without a display, only the "Store key num-

ber" can be programmed using the keypad. Other functions can
only be programmed using the HiPath 1100 Manager.

Service Menu

*91= PROG KEY?

CHANGE KEY?

CONFERENCE ?

SAVE INCOMPLETE?

SAVE?

PREVIOUS?

EXIT?

ANOTHER KEY?

oi.book Seite 96 Mittwoch, 16. August 2006 8:41 08