Conditional, Step by step – Siemens HIPATH 1190 User Manual

Page 58

Step by step

Functions used for Receiving Calls

Conditional

Incoming calls can be forwarded to a specified destina-

tion, as configured in any TSP-type (TAPI Service Provid-

ers) application, such as Windows TAPI Browser: Previ-

ous list or Unconditional Call Forwarding settings will be

overwritten by the new list settings

.The following information is needed for configuring a

list:

• Incoming Caller ID

• Day of the week and time

• Type of call (internal or external)

When more than one number have been specified for

incoming calls to an extension, the call forwarding prior-

ity will be:

1. Checks to see if the Caller ID for the incoming call

matches the number programmed for the extension

2. Checks to ensure that the Type of Call (internal or ex-

ternal) has been configured

3. Checks the time settings.

Required: The extension has permission for conditional

Call Forwarding and the system is connected to a PC

that has a TAPI application installed.

1. Rules and conditions for Call Forwarding can be con-

figured for each extension by using a Windows TAPI

application

2. Apply the settings to the extension desired.

3. From this moment on extension will be forwarded.

The display shows that this feature is enabled.

[1] The system allows up to 50 Call Forwarding numbers (see Pro-

gramming Manual,Programming an Extension - Conditional For-
warding Limited by Extension and Permission for Conditional Call
Forwarding).

Conditional Call Forwarding has priority over an unconditional Call
Forwarding.

Conditional Call Forwarding cannot be used on a S

extension.

This feature is available when using a CTI (Com-

puter Telephony Integration) interface.

CFC ON

oi.book Seite 58 Mittwoch, 16. August 2006 8:41 08