Siemens HIPATH 1190 - Manual (Page 52)

Step by step
Functions used for Receiving Calls
52
... with a Headset
Required: A headset must be connected. A key has
been programmed for the "Headset" feature or the
headset has an electronic control button that acts as the
hook (see Headset feature).
The extension receives a call ringing signal. A headset
does not receive a ringing signal unless it’s electronic
hook button is appropriately configured.
: Press to confirm.
or
Press the HEADSET ON key or activate the electronic
hook control.
Once the call is answered the display shows Caller ID
information.
Answering a Call on Hold
If there is an intermittent signal in the background when
a conversation is in progress, it means there is a second
or an urgent call being made to that extension.
Required: A call is in progress.
:
Select and press to confirm.
or
Press this key.
Enter the code for answering a call.
or
Press the "CALL WAITING" key.
or
> :
Select and press to confirm.
or
Enter the code for switching between two calls.
Wait for the call to be answered. Initiate conversation.
The first call is put on hold.
<< >>
ANSWER?
HEADSET ON
Headsets do not send a call ending tone (busy
signal) at the end of a call.
CALL WAITING
Service Menu
5 * 5
CALL WAITING
Toggle/Connect ?
2 *
oi.book Seite 52 Mittwoch, 16. August 2006 8:41 08