Siemens HIPATH 1190 - Manual (Page 56)

Step by step
Functions used for Receiving Calls
56
Wait for a dial tone.
Enter the number you want to call.
: Press to confirm.
When there is no answer
1
The Call Forwarding - No Answer feature allows rerout-
ing a call made to a specific extension to another exten-
sion, a Voice Mail Subscriber Group or an external num-
ber, after a specified timeout.
Press this key.
> : Select and press to confirm.
> :
or
Enter the code for internal Call Forwarding.
Enter the number for the
1. Extension you want to call (e.g., 11/101).
2. UCD Subscriber Group for Voice Mail (e.g., 790).
3. Call group (e.g: 770)
4. Access to an external line (e.g., 0) and the external
destination number.
: Press to confirm.
If Call Forwarding is enabled, the display will show
"FORWARD TO:" during a period of time.
SAVE?
[1] The call rings at the destination extension until the preset timeout
expires (see Programming an Extension - Call Forwarding - No An-
swer With a Timeout in the Programming Manual)
Service Menu
MORE FEATURES?
*14=FORW. NO REPLY ON
4 * 1
SAVE?
CF-NR TO...
oi.book Seite 56 Mittwoch, 16. August 2006 8:41 08