Introduction, About this user manual – Siemens HIPATH 1190 User Manual

Page 2

Introduction

The HiPath 1100 family consists of the following systems: HiPath 1120, HiPath 1150 and

HiPath 1190. The features and operation of these systems are very similar. Their differenc-

es stem from their capability regarding the number of extensions, external lines and op-

tional modules available.

The following documentation package was developed to describe the characteristics for

these systems:

• User Manual:

This manual describes step by step how to operate and use the features provided by

each system.

• Programming Manual:

The Configuration Manual briefly describes the installation of HiPath 1120, HiPath 1150

and HiPath 1190 systems as well as the programming codes for the entire family of sys-

tems. It highlights the specific characteristics of each system.

• System Telephones Instruction Manual:

It is included with the telephone package and describes how to setup and use the tele-

phone sets.

• Quick Reference Guide for Standard and System Telephones:

This guide provides summarized information on how to use the different codes for the

features of each system:

• Attendant Console Quick Reference Guide:

This guide provides summarized information on how to use a system telephone as an

Attendant Console.

• Service Manual.

This manual contains information regarding Siemens distributors and Service Centers

where you can request maintenance service and programming assistance as well as

purchase products and options for your Communications Systems.

• Warranty Certificate:

This Certificate defines the terms and conditions of the warranty provided by Siemens.

About This User Manual

This manual describes the operation and implementation of the HiPath 1100 system fea-

tures with the system telephones optiPoint 500 economy, optiPoint 500 basic, optiPoint

500 standard and optiPoint 500 advance. It also describes all feature codes and functions

provided by your system. Some functions may not be available with your system. The rea-

sons for this are the following:

• The function is not configured for your type of line and/or system. Ask your System Ad-

ministrator for further information.

• Your communications platform does not support the feature. Ask about upgrade capa-

bilities for your system.

oi.book Seite 2 Mittwoch, 16. August 2006 8:41 08