Caller lists – Siemens HIPATH 1190 User Manual

Page 29

Functions used for making calls

Step by step

Caller Lists

If so configured, the last calls not answered identified

by the extension are stored in three caller lists. These

caller lists can be programmed to save only external

calls or both external and internal calls. Using a System

Telephone with a display you can view and select lists:

• 1 = CALLS NOT ANSWERED

• 2 = CALLS ANSWERED

• 3 = CALLS MADE

Up to 10 calls can be stored for each caller list. They are

stored in the order they were received or made. Each

call is stored with a time stamp. The list starts with the

most recent call that has not been recalled. If several

calls were from the same caller, the list will show the

time of the last call and the total number of times the

call was received.

Looking Up a Caller List

Select and press to confirm.

Enter the dialing code for looking up Caller Lists.

Select and enter to select the type of Caller List want-

ed.

Enter the number of the list you want to look up:

= Calls not answered

= Calls answered

= Calls dialed

Enter to display additional lists.

[1]Make sure that Caller ID is enabled by your carrier.
[2] When the Do Not Disturb facility for an extension is activated, un-

answered calls are not stored in the memory.

CALLER LIST?

8 2

1=CALLS NOT ANSWERED

2=CALLS ANSWERED

3=CALLS DIALED

NEXT?

oi.book Seite 29 Mittwoch, 16. August 2006 8:41 08