Siemens HIPATH 1190 - Manual (Page 91)

Miscellaneous Functions
91
Step by step
Door Opener
1
The Door Opener feature allows a programmed exten-
sion to open a specified door.
Required: The call is made to the Entrance Telephone.
Lift the handset.
or
Press this key. The LED turns on.
:
Press to confirm.
or
Press this key.
> :
Select and press to confirm.
or
Enter the code for opening the door.
or
Press the "OPEN DOOR" key.
Activating System Programming
The System Programming Mode allows extension 11 on
the HiPath1120/1150 and extension 101 on the HiPath
1190 to access the programming codes and change sys-
tem features.
Press this key.
> : Select and press to confirm.
> :
or
Enter the code for programming.
Enter your 5-digit password (the default is: 31994).
Enter the codes and their complements according to
Programming Manual.
[1] In order to use this feature the system must be equipped with an
Entrance Telephone and a Door Opener.
Extensions authorized to open doors are configured during system
programming (see Entrance Telephone in the Programming Manu-
al).
An urgent call warning tone is played when the extension config-
ured to answer the Entrance Telephone is busy.
Speaker
Open Door ?
Service Menu
*61=Open Door ?
1 * 6
OPEN DOOR
Service Menu
MORE FEATURES?
*95=SYSTEM ADMIN ?
5 * 9
oi.book Seite 91 Mittwoch, 16. August 2006 8:41 08