Siemens HIPATH 1190 - Manual (Page 33)

Functions used for making calls
33
Step by step
Recall due to No Answer/Busy
:
Press to confirm.
or
Enter the code for confirming the recall.
or
Wait 7 seconds Wait 7 seconds until you hear a distintive tone (if config-
ured, Recall will be automatically activated).
Wait for a confirmation tone.
Replace the handset.
or
Press this key. The LED turns off.
Wait for the recall.
If the configuration for activating Recall has been
changed
1
:
Wait a few seconds until the display shows "RECALL
ON" and the busy signal or the call is briefly interrupted.
Replace the handset.
or
Press this key. The LED turns off.
Wait for the recall.
Answering a Recall
Required: Recall is active.
The telephone rings (a distinctive ring).
The display shows "RECALL:......" and the number you
want to call.
Lift the handset.
or
Press this key. The LED turns on.
Wait for the call to be answered. Initiate conversation.
RECALL?
8 * 5
Speaker
[1] (See Activating Recall/Urgent Call with Timeout, in the Program-
ming Manual)
RECALL ENABLED?
Speaker
<< >>
RECALL: ......?
Speaker
oi.book Seite 33 Mittwoch, 16. August 2006 8:41 08