Siemens HIPATH 1190 - Manual (Page 47)

Features used during Call
47
Step by step
Toggle
The toggle feature allows switching conversations be-
tween two calls.
Required: A consultation is in progress.
> :
Select and press to confirm.
or
Press this key.
Enter the code for switching between two calls.
or
Press the "TOGGLE" key.
Wait to return. Proceed with the conversation.
Conference
1
The Conference feature allows a third party to partici-
pate in a conversation when a call is in progress.
Required: A call is in progress.
Enter the extension (e.g., 11/101) or dial the access
code for an external line (e.g., 0) then the number to be
included in the conference.
Wait for the call to be answered.
Inform the person about the conference.
> : Select and press to confirm.
or
Press this key.
Enter the code for initiating a three-way conference.
or
Press the "CONFERENCE" key.
Wait. Start the conference.
TOGGLE/ CONNECT?
Service Menu
2 *
TOGGLE
[1] The maximum number of simultaneous conferences allowed by
the HiPath 1100 system is two. Note: The Override feature is tick-
eted as a Conference.
The extension must enabled for conferencing.
Once a conference ends a new ticket is generated.
An Entrance Te;ephone cannot be part of a Conference.
CONFERENCE ?
Service Menu
3 *
CONFERENCE
oi.book Seite 47 Mittwoch, 16. August 2006 8:41 08