Siemens HIPATH 1190 - Manual (Page 48)

Step by step
Features used during Call
48
Parking
1
The Parking feature can place up to 10 internal or exter-
nal calls on hold and answer these at any extension.
Required: A call is in progress.
Press this key.
> : Select and press to confirm.
or
Enter the code for answering a call.
or
Press the "PARK" key.
... Select the parking slot
(e.g., 0).
Replace the handset.
or
Press this key. The LED turns off.
Recovering a parked call
Press this key.
> : Select and press to confirm.
or
Press this key.
Enter the code for recovering the call.
or
Press the "PARK" key.
... Select the parking slot
(e.g., 0).
Initiate conversation.
[1] If the slot selected is busy, a rejection tone is heard.
If a call that was placed on Parking is not recovered after a speci-
fied timeout, it is sent back to the originating extension.
Service Menu
*56=PARKING ?
6 * 5
PARK
0 9
Speaker
Service Menu
#56=RETRIEVE CALL?
Service Menu
6 # 5
PARK
0 9
oi.book Seite 48 Mittwoch, 16. August 2006 8:41 08