Siemens HIPATH 1190 - Manual (Page 21)

Functions used for making calls
21
Step by step
Switching to Speakerphone
Conversation using the Handset
and Press and hold this key while placing the handset on the
hook. Then release the key and resume the conversa-
tion.
Conversation using a Headset
Press the key and resume the conversation.
Switching to Handset
Conversation using the Speakerphone or a Headset
and Lift the handset and resume conversation.
Switching to a Headset
Required: A headset must be connected. A key has
been programmed for the "Headset" feature or the
headset has an electronic control button that acts as the
hook (see Headset feature).
Conversation using the Speakerphone.
Press the HEADSET ON key or activate the electronic
hook control and resume the conversation.
Conversation using the Handset
Press the HEADSET ON key or activate the electronic
hook control.
Keep handset off the hook and resume conversation.
Speaker
Speaker
HEADSET ON
HEADSET ON
Headsets do not send a call ending tone (busy
signal) at the end of a call.
oi.book Seite 21 Mittwoch, 16. August 2006 8:41 08