Siemens HIPATH 1190 - Manual (Page 69)

Functions used for Receiving Calls
69
Step by step
From an external telephone
Connect to your HiPath 1100.
Enter the MSN designated to your EVM by the system’s
Support Technician (check with the Support Technician).
or If Call Forwarding to Entry Voice Mail is activated:
+ Enter your external number (MSN) and press the Star
(*) key during the message playback.
Enter your personal mailbox password (default = 1234).
Enter your mailbox number (the same as your internal
extension number).
Wait for the Voice Mail to answer the call.
Proceed with what you want to do by following the in-
structions given by the Voice Mail Server.
Second Attendant
1
When a Second Attendant is configured, it receives
calls forwarded by the First Attendant (an extension or
group) to the Second Attendant (an extension or group).
This occurs when the First Attendant is not available or
does not answer the call within a specified period of
time.
*
If your HiPath 1100 is configured for "... Using Au-
tomatic Seizure of an Active External Line" (con-
sult your system’s Support Technician) press the
Flash key before selecting your mailbox.
With Pulse Dialing phones you must use Suffix
Dialing (MF) Æ page 49.
[1] A Second Attendant may also consist of a Fax/DID
Refer to the Programming Manual: Programming an Extension -
Second Attendant for MSN, and Programming an External Line -
Timeout for a Second Attendant to Answer a Call on an External
Analog Line.
oi.book Seite 69 Mittwoch, 16. August 2006 8:41 08