Siemens HIPATH 1190 - Manual (Page 38)

Step by step
Functions used for making calls
38
Speakerphone Auto-Answering
Mode
1
The called extension receives an Alert tone. The call us-
ing the speakerphone is established immediately after
this tone is received.
Required: A System Telephone with a Speakerphone at
the destination number.
> : Select and press to confirm.
or
> :
or
or Enter the code to activate or deactivate answering.
LCR
2
The LCR (Least Cost Routing) is designed to lower tele-
phone communications costs. When LCR is enabled, all
outgoing calls are routed to provide the least expensive
connection costs. A table is created listing all times of
the day, days of the week, telephone service providers
so that calls can be made when rates are at their low-
est. After programming, you can make calls with no
need to enter the carrier code since LCR automatically
uses the carrier that provides the lowest rate at the time
the call is being placed.
Required: This feature must be configured for the sys-
tem by using the HiPath 1100 Manager.
Lift the handset.
or
Press this key. The LED turns on.
Enter the code for accessing an external line (e.g., 0).
Wait for an external line dial tone.
Enter the external number you want to call.
Wait for the call to be answered. Initiate conversation.
[1] This feature must be enabled by the destination number during
programming (see Programming an Extension - Auto-Answering
Mode, in the Programming Manual).
HF ANSWERBACK ON ?
HF ANSWERBACK OFF ?
6 * 9 6 # 9
[2] Settings must be configured on the HiPath 1100 Manager.
Speaker
oi.book Seite 38 Mittwoch, 16. August 2006 8:41 08