Siemens HIPATH 1190 - Manual (Page 72)

Step by step
Functions used for Receiving Calls
72
If a name has been stored for this group, it will be dis-
played (if configured by the system’s Support Techni-
cian).
or
If an X does not appear, it means that the ringing signal
is disabled.
or
Enter the Call Group number.
• to = Call Group (CG);
or
Enter the Hunt Group number.
• to = Hunt Groups (HG);
: Press to confirm. The next number in the group will be
displayed.
or
> : Select and press to confirm.
The ringing signal for the group displayed is enabled.
or
> :
Select and press to confirm.
The ringing signal for the displayed group is disabled.
or
> : Select and press to confirm.
The ringing signal for all groups is disabled.
or
Enter the code for "LEAVE ALL GROUPS".
or
> :
Select and press to confirm.
The ringing signal for all groups is enabled again.
or
Enter the code for "REJOIN ALL GROUPS ."
770 (Name)
7 0 7 7 9 7
8 0 7 8 9 7
NEXT?
JOIN GROUP?
LEAVE GROUP?
#=LEAVE ALL GROUPS?
#
#=REJOIN ALL GROUPS?
*
oi.book Seite 72 Mittwoch, 16. August 2006 8:41 08