Siemens HIPATH 1190 - Manual (Page 15)

Using the HiPath 1100 Features
15
Using the HiPath 1100 Features
Considerations
Feature descriptions and examples available for HiPath 1100are based on a standard opti-
Point 500 system telephone model.
Check specific procedure to be followed for the different system telephone models. For
information on how to configure each model, see the appropriate Instructions Manual.
All basic features are described in the Quick Reference Guide For System Telephones.
The information in this document provides only general descriptions of the features. The
actual features may not correspond exactly to the descriptions herein and, furthermore,
they are subject to changes to the extent that products continue to be developed.
The selection of features to be provided is not binding unless explicitly established in the
terms of the contract.
Numbering Plan
A Numbering Plan assigns extensions, external lines, and groups - as well as other num-
bers that can be selected with features and programming codes - to execute specific func-
tions.
Description HiPath 1120 HiPath 1150 HiPath 1190
External line 801 to 808 801 to 832 801 to 845
Extension, including S
0
11 to 30 11 to 60
610 to 645
101 to 240
Groups of external lines 0 or 890 to 899
Call Groups (CG) 770 to 779
Hunt Groups (HG) 780 to 789
UCD Subscriber Groups 790 to 799
Carrier 9
EVM - Default internal number 790
EVM - Message ports 7491 and 7492
EVM - Virtual ports 744 to 747
Fax/DID - Virtual ports for messages 740 to 743
USB/CAPI line 10 100
Substitution for * and # 75 and 76 (accordingly)
oi.book Seite 15 Mittwoch, 16. August 2006 8:41 08