Call charge consultation – Siemens HIPATH 1190 User Manual

Page 95

Miscellaneous Functions

Step by step

Call Charge Consultation

If call charges for calls made have been established, the

system will have the ability to show the totals for the

calls on the displays of system telephones.

For the current call:

The call charge is shown on the display at the end of the

call (Standard)

If you would like to see the charges while the calls are

in progress, ask your system’s Support Technician to re-

quest activation of the AOCD (Advice of Charge During

the Call) facility from your local Carrier.

Depending on the Carrier, toll-free calls will also be

shown. Before or during a call the display will read

"FREE OF CHARGE".

When a call is transferred the call charge is assigned to

the extension that received the transfer.

For all calls that were made and have a remaining
balance:

First, the total charges are displayed (total for all calls

made). After five seconds the remaining balance is dis-

played, if the Support Technician has configured a Call

Charge limit.

Press this key.

Select and press to confirm.

Enter the code for activating Call Charge Consultation.

[1] Call Charge ticketing must be programmed in the system (see

General Programming - Call Charge in the Programming Manual).

Service Menu

*65=SHOW CALL CHARGES?

oi.book Seite 95 Mittwoch, 16. August 2006 8:41 08