Siemens Simatic S7-300 CPU 31xC and CPU 31x S7-300 - Manual (Page 241)

CPU 31xC and CPU 31x, Technical data
Manual, Edition 08/2004, A5E00105475-05
Index-1
Index
A
Aim of this Documentation, iii
Analog inputs
Configuration, 6-41
Not connected, 6-38
Technical data, 6-51
Analog outputs
Not connected, 6-38
Technical data, 6-53
Applicability of this manual, A-1, A-2
Application area covered by this manual, iii
Application View, 3-17, Glossary-16
Automation concept, 3-17, Glossary-15
B
Blocks, 3-20
compatibility, 3-20
Download, 4-11
Upload, 4-12, 4-13
C
Communication
CPU services, 3-6
Data consistency, 3-16
Global data communication, 3-9
S7 basic communication, 3-7
S7 communication, 3-8
Communication load
configured, 5-9
Dependency of physical cycle time, 5-10
Influence on the physical cycle time, 5-10
Communications concept, 3-17, Glossary-16
Component-Based automation, 3-17, Glossary-15
Compression, 4-13
Configuration
Interrupt inputs, 6-39
Standard AI, 6-41
Standard DI, 6-39
Standard DO, 6-41
Technological functions, 6-44
Consistent data, A-7
CPU 312C
Technical data, 6-3, 7-3, 7-8, 7-13, 7-26, 7-33
Usage of integrated I/Os, 6-28
CPU 313C
Technical data, 6-8
Usage of integrated I/Os, 6-30
CPU 313C-2 DP
Technical data, 6-14
Usage of integrated I/Os, 6-30
CPU 313C-2 PtP
Technical data, 6-14
Usage of integrated I/Os, 6-30
CPU 314C-2 DP
Technical data, 6-21
Usage of integrated I/Os, 6-30
CPU 314C-2 PtP
Technical data, 6-21
Usage of integrated I/Os, 6-30
CPU memory reset, 4-13
CPUs 31xC
Differences, 2-3
Cycle time
Calculation, 5-5
Definition, 5-2
Extension, 5-4
Maximum cycle time, 5-9
Process image, 5-2
Sample calculation, 5-24
Sequence of cyclic program processing, 5-3
Time slice model, 5-2