Intel SERVER SYSTEM SR2500AL - Manual (Page 91)

Intel® Server System SR2500AL User’s Guide 69
1. Attach the Intel
®
RMM board to the server board connector and snap the standoff
into the matching hole on the server board (see letter “F” in the following figure).
Figure 59. Installing the Intel
®
RMM and the Intel
®
RMM NIC Module to the
Server System
2. Install the PCI riser assembly into the server system. For instructions, see
“Installing the PCI Riser Assembly” .
3. Install the processor air duct. For instructions, see “Installing the Processor Air
Duct” .
4. Install the server system cover. For instructions, see “Installing the Server System
Cover” .
5. Plug all peripheral devices and the AC power cable(s) into the server.
AF000741
E
F
C
D
B
A