beautypg.com

Reboot the system for changes to take effect, Characters are distorted or incorrect, System cooling fans do not rotate properly – Intel SERVER SYSTEM SR2500AL User Manual

Page 137

background image

Intel® Server System SR2500AL User’s Guide

115

Are the brightness and contrast controls on the video monitor properly adjusted?

Is the video monitor signal cable properly installed?

Does this video monitor work correctly if plugged into a different system?

Is the onboard video controller enabled in the BIOS?

Remove all add-in cards and see if the video returns. If successful, add the cards

back in one at a time with a reboot between each addition.

Make sure the memory DIMMs comply with the system requirements.

Make sure the memory DIMMs have been populated according to the system

requirements.

Remove the memory DIMMs and re-seat them.

Make sure the processor(s) comply with the system requirements.

Make sure the processor(s) have been populated according to the system

requirements.

• Remove the processor(s) and re-seat them.

If you are using an add-in video controller board, do the following:

1. Verify that the video works using the onboard video controller.
2. Verify that the video controller board is fully seated in the server board connector.
3. Reboot the system for changes to take effect.
4. If there are still no characters on the screen after you reboot the system and POST

emits a beep code, write down the beep code you hear. This information is useful

for your service representative.

5. If you do not receive a beep code and characters do not appear, the video display

monitor or video controller may have failed. Contact your service representative or

authorized dealer for help.

Characters Are Distorted or Incorrect

Check the following:

Are the brightness and contrast controls properly adjusted on the video monitor? See

the manufacturer's documentation.

Are the video monitor's signal and power cables properly installed?

• Does this video monitor work correctly if plugged into a different system?

System Cooling Fans Do Not Rotate Properly

If the system cooling fans are not operating properly, it is an indication of possible system

component failure.

Check the following: