Intel SERVER SYSTEM SR2500AL - Manual (Page 63)

Intel® Server System SR2500AL User’s Guide 41
Removing the Small Air Baffle
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information” .
2. Power down the server and unplug all peripheral devices and the AC power
cable(s).
3. Remove the server system cover. For instructions, see “Removing the System
Cover” .
4. Pull up and out on the air baffle to remove it. See the figure below.
Figure 30. Removing the Small Air Baffle
Installing the Small Air Baffle
1. Lower the baffle into the server system.
2. Snap the baffle into place as shown in the figure below.
TP02136