Intel SERVER SYSTEM SR2500AL - Manual (Page 83)

Intel® Server System SR2500AL User’s Guide 61
Figure 53. Removing the PCI Riser Card from the Server System (Full Height
Side)
10. Install the replacement riser connector, if desired. For instructions, see “Installing
PCI Riser Card into the Server System” .
11. Install the PCI add-in card(s) if desired. For instructions, see “Installing a PCI Add-
in Card” .
12. Install the PCI riser assembly into the server system. For instructions, see
“Installing the PCI Riser Assembly” .
13. Connect any cables to add-in cards that require them. See your add-in card
documentation for information and add-in card requirements.
14. Re-install the processor air duct. For instructions, see “Installing the Processor Air
Duct” .
15. Install the server system cover. For instructions, see “Installing the Server System
Cover” .
16. Plug all peripheral devices and the AC power cable(s) into the server.
AF000326
B
A
C