Intel iEi Motherboard A300 - Manual (Page 22)

A300 Motherboard
1 x Disk LED connector
1 x PCMCIA slot
1 x Power button connector
3 x RS-232 serial port connectors
1 x RS-422/485 serial port connector
1 x System panel connector
1 x LCD LVDS connector
3 x USB2.0 connectors
The A300 has the following connectors on the board rear panel:
1 x Audio connector
1 x COM port jumper
1 x DVI-I connector
3 x Serial port connectors
1 x CRT connector
1 x PS/2 keyboard connector
1 x PS/2 mouse connector
2 x USB 2.0 connectors
2 x LAN RJ-45 connectors
The A300 has the following on-board jumpers:
Clear CMOS
CF Card Setup
COM Port Jumper Settings
LCD Voltage Setup
LCD Rotate Setup
1.2.2 Technical Specifications
A300 technical specifications are listed in Table 1-1. Detailed descriptions of each
specification can be found in Chapter 2.
Page 7