beautypg.com

E.1 introduction, E.1.1 accessing the ac’97 codec, E.1.2 driver installation – Intel iEi Motherboard A300 User Manual

Page 183: E.2 sound effect configuration, E.2.1 accessing the sound effects manager, E.1 i, Ntroduction, E.2 s, Ound, Ffect

background image

A300 Motherboard

E.1 Introduction

The motherboard comes with an on-board Realtek ALC203 CODEC. Realtek ALC203 is a

16-bit, full duplex AC’97 Rev. 2.3 compatible audio CODECwith a sampling rate of 48KHz.

E.1.1 Accessing the AC’97 CODEC

The CODEC is accessed through a connector on the A300 motherboard. Connect the

audio kit to the connector.

E.1.2 Driver Installation

The driver installation has been described in Chapter 7

After rebooting the sound effect configuration utility appears in the Windows Control Panel

(see Figure E-1). If the peripheral speakers are properly connected, sound effects should

be heard.

Figure E-1: Sound Effect Manager Control Panel

E.2 Sound Effect Configuration

E.2.1 Accessing the Sound Effects Manager

Page 168

See also other documents in the category Intel Hardware: