MACKIE HDR24/96 - Manual (Page 72)

HDR 24/96
overwriting the Locate Time. When the ENTER button is pressed, the Locate Time is changed. To
cancel, don't press ENTER, but instead press RECALL a second time. The LED above the RECALL
button goes off after Recall is executed or canceled.
Recall on the Remote 48
Autolocator Action Remote 48 Key Sequence
Recall Locate n to Locate Time RECALL LOCATE n ENTER
Recall Punch length to Locate Time RECALL Punch ENTER
Recall Loop length to Locate Time RECALL LOOP ENTER
Recall Pre-roll Time to Locate Time RECALL PREROLL ENTER
Recall Last Play to Locate Time RECALL PLAY ENTER
Recall Cue n to Locate Time RECALL ### ENTER
Recall Next/Prev Cue to Locate Time RECALL +/NEXT or -/PREV
ENTER
• Press +/NEXT or -/PREV multiple times
or hold for more than 1 second to scroll
• Cues displayed chronologically. Cue List
wraps to top/bottom when end is reached
Recall Cue from Cue List to Locate Time RECALL
+/NEXT or -/PREV, or WHEEL
ENTER
• Press +/NEXT or -/PREV multiple times
or hold for more than 1 second to scroll
• Cues displayed chronologically. Cue List
wraps to top/bottom when end is reached
Cancel Cue List or Register Recall/Preview RECALL +/NEXT, -/PREV,
WHEEL, ###, PRE ROLL, PUNCH,
LOOP, PLAY (Last Play), and/or
LOCATE n) RECALL
Cancel Recall/Preview RECALL RECALL
Previewing
Using Recall, the user can preview any stored time value from the LOCATE TIME display
without overwriting the current value of Locate Time. After hitting RECALL, you can type in
Cue numbers, press Numbered Locate keys, press PUNCH (for auto-punch length), press LOOP
(for Loop length), press PRE ROLL (for Pre-Roll length), or press PLAY (for time of Last Play)
in any order, for as many parameters as you are interested in seeing. If looking at multiple Cues,
type in all three digits (with leading zeros if needed) and as each Cue number entry becomes
complete the LOCATE TIME display will change. It is also possible with a Cue displayed to
then “walk-through” all the Cues with the +/NEXT and -/PREV buttons, or simply scroll the list
of Cues with the WHEEL. At any time during a Preview the displayed value can be committed to
Locate Time by hitting ENTER, or the operation can be canceled by hitting RECALL once again.
Preview on the Remote 48 ~ Uses LOCATE TIME display
Autolocator Action Remote 48 Key Sequence
Preview Locate n RECALL LOCATE n
Preview Punch length RECALL PUNCH
Preview Loop length RECALL LOOP
HDR 24/96 72