MACKIE HDR24/96 - Manual (Page 158)

HDR 24/96
SYSTEM
This menu is a catchall of assorted system-level functions
Menu Selection
Submenu
s
What It Does
Run FTP
Starts the FTP server. Displays the IP address.
Press Continue to quit the FTP server and exit. DO
NOT press continue until the FTP transfer is
completed.
Sets the IP addressing parameters
Sets the IP address
<< >>
These buttons move the V cursor
through the digits in IP address. The
(-)DEC and (+)INC buttons scroll
through the numbers for the digit
indicated by the V cursor.
OK Selects the IP address
IP
Cancel
Does not change the IP address,
returns to the SETUP TCP menu.
Sub
Sets the Subnet address mask. Operation is the
same as above
Gate
Sets the Gateway address mask. Operation is the
same as above
Setup TCP
Exit Returns to the top-level SYSTEM menu
Sets MDS Network options
<< >>
Selects network channel. OFF removes
the recorder from the network.
Network
Channel
OK Returns to MDS Network submenu
<< >> Selects Master (tracks 1-24) or Slave
(tracks 25-48) when used with a
Remote 48. Select OFF if the recorder
is not used with a Remote 48 or other
48 track remote controller.
48tk
Mode
OK Returns to MDS Network submenu
<< >> Toggles Save Project linking
on/off
Save
OK Returns to Link Options
MDS Network
Link
Options
Edit Same as above – toggles duplication of
area selection start and end points on
networked recorder.
HDR 24/96 158