MACKIE HDR24/96 - Manual (Page 166)

HDR 24/96
Parameters Saved with the Project AND in the Template
These parameters are saved when a Project is saved.
They can also be saved as the Template for new Projects when you select Save As New
Template from the File menu. The settings for these parameters in the current project become the
default values for subsequent new Projects and are in effect from the whenever a new Project is
created.
Select Reset Template from the File menu to restore the factory default settings. Resetting the
Template will not affect the current Project, but will affect the next new Project to be created.
Parameter Default Setting
Nudge Amount 10 msec
Nudge Selection Center
Grid Setting Ruler Marks
Snap Off
Splice Off
Auto X-Fade
Off
Snap to Cues Off
Snap to Grid On
Time Units SMPTE
Default Tempo 120 BPM
Track Names Track 1, Track 2, etc.
Parameters Not Saved (with a Project or otherwise)
The following parameters are not saved when a Project is saved, neither are they retained after a
shutdown. Depending on the parameter, they are either turned to Off when opening a stored Project
or creating a new Project, or they retain their current setting when changing from one Project to the
next.
Parameter New Project Power-On Defaults
Loop Off Off
Punch Off Off
Rehearse Off Off
Auto Take Off Off
Record Ready Off Off
Solo Off Off
All Input Monitor No change Off
Auto Input Monitor No change On
Auto Scroll No change On
Selected Tool No change I-Beam
Selected Panel No Change Meters
HDR 24/96 166