Grizzly G0623X3 - Manual (Page 47)

Model G0623X/G0623X3 (Mfg. Since 5/12)
-45-
figure 81. Crosscutting workpieces
using the rip fence as a cut-off gauge.
additionally, this machine has the capability of
crosscutting workpieces while using the rip fence
as a cut-off gauge (
figure 81).
determine which cutting operation will be best
suited for the workpiece to be crosscut.
— if you will be crosscutting full size panels,
then skip ahead to crosscutting full size
panels.
— if you will be crosscutting smaller panels,
then skip ahead to crosscutting smaller
panels.
— if you will be crosscutting workpieces using
the rip fence as a cut-off gauge, then skip
ahead to
crosscutting using rip fence
as a cut-off gauge.
the model g0623X/g0623X3 can crosscut full
size panels with the fence in the forward or rear
position, although it is easier to load full size pan-
els with the crosscut fence mounted in the forward
position (see
figure 79).
mounting the crosscut fence in the rear position
(
figure 80) gives greater stability for crosscutting
smaller panels.
crosscutting
figure 79. Crosscutting full size panel.
forward mounted
Crosscut fence
figure 80. Crosscutting smaller panels.
rear mounted
Crosscut fence