HP ProLiant DL100 Series Server DL100 Series - Manual (Page 95)

Electrostatic discharge
Preventing electrostatic discharge
To prevent damaging the system, be aware of the precautions you need to follow when setting up the
system or handling parts. A discharge of static electricity from a finger or other conductor may damage
system boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the
device.
To prevent electrostatic damage:
• Avoid hand contact by transporting and storing products in static-safe containers.
• Keep electrostatic-sensitive parts in their containers until they arrive at static-free workstations.
• Place parts on a grounded surface before removing them from their containers.
• Avoid touching pins, leads, or circuitry.
• Always be properly grounded when touching a static-sensitive component or assembly.
•
nt resistance in the ground cords.
• ions. Wear the straps on both feet
ssipating floor mats.
e any of the suggested equipment for proper grounding, have an authorized reseller
information on static electricity or assistance with product installation, contact an authorized
reseller.
Grounding methods to prevent electrostatic
discharge
Several methods are used for grounding. Use one or more of the following methods when handling or
installing electrostatic-sensitive parts:
Use a wrist strap connected by a ground cord to a grounded workstation or computer chassis. Wrist
straps are flexible straps with a minimum of 1 megohm ±10 perce
To provide proper ground, wear the strap snug against the skin.
Use heel straps, toe straps, or boot straps at standing workstat
when standing on conductive floors or di
• Use conductive field service tools.
• Use a portable field service kit with a folding static-dissipating work mat.
If you do not hav
install the part.
For more
Electrostatic discharge 95