HP ProLiant DL100 Series Server DL100 Series - Manual (Page 15)

1. Power down the server (on page 13).
2. Remove the server from the rack (on page 13).
3. Remove the access panel (on page 14).
4. Disconnect all internal cables connected to existing expansion boards.
5. Remove the PCI riser board assembly:
a. Remove the T-10 screw.
b. Remove the T-15 screws.
c. Remove the riser board assembly.
Install the PCI riser board assembly
CAUTION: To prevent damage to the server or expansion boards, power down the server
and remove all AC power cords before removing or installing the PCI riser board assembly.
Operations 15