HP ProLiant DL100 Series Server DL100 Series - Manual (Page 83)

Errors occur after the system software is changed
n log and operating system log for entries indicating why the software failed.
rmine if they are the cause of the error. You may need to obtain the
tility and manually set the software switches. Refer to the application
ebsite, or both.
verwritten files. Refer to the application documentation to find out which files are added
ation.
ure you have the most current drivers.
Firmware maintenance
ensure that HP servers provide maximum uptime with minimal
in technologies also reduce server management efforts, enabling administrators
e problems without taking servers offline.
Types of ROM
Ms include:
A syst e effect. For disaster recovery or ROM downgrade
are available in either redundant ROM or a ROM
oller ROMs
Flashing O
uses
w
Action: Change settings to the original configuration. If more than one setting was changed, change the
settings one at a time to isolate the cause of the problem.
Errors occur after an application is installed
Action:
• Check the applicatio
• Check system settings to dete
settings from the server setup u
documentation, the vendor w
• Check for o
by the applic
• Reinstall the application.
• Be s
HP has developed technologi
ma tenance. Many of these
es to help
to work on issues and resolv
Types of RO
• System ROM (on page 83)
• Option ROMs (on page 83)
System ROM
em reboot is required for a ROM upgrade to tak
purposes, backups of the most current ROM image
backup.
Option ROMs
Types of option ROMs include:
• Array contr
• Lights-out 100i ROMs
• Hard drive ROMs
R M
The process of upgrading system and option ROMs is referred to as flashing the ROM. A ROM flash
soft are to replace the current system ROM on a target server with a new ROM image. Flash the ROM
to:
Troubleshooting 83