HP ProLiant DL100 Series Server DL100 Series - Manual (Page 47)

To change any ORCA default settings and override the auto-configuration process, press the F8 key when
prompted.
By default, the auto-configuration process configures the system for the English language. To change any
default settings in the auto-configuration process (such as the settings for language, operating system, and
primary boot controller), execute the BIOS Setup Utility (on page 46) by pressing the F10 key during
ngs are selected, exit the BIOS Setup Utility and allow the server
BIOS
w POST error messages and run BIOS
t BIOS Serial Console, see the BIOS Serial Console User Guide on the
HP website (http://www.hp.com/support/smartstart/documentation).
ROM
nsert
t the
ns of the ROMPaq utility are also available for updating the system firmware.
firmware revisions.
P website (http://www.hp.com/go/support).
LO1
agement functionality. For more information, see the server-
ttp://www.hp.com/servers/proliant).
HP In
hardware and tests the system to
help and can be accessed using the Insight
com/support).
HP R
vers that performs a wide range of configuration
installed options
s
boot controller
power-up when prompted. After the setti
to reboot automatically.
Serial Console
BIOS Serial Console allows you to configure the serial port to vie
Setup Utility remotely through a serial connection to the server COM port. The server that you are
remotely configuring does not require a keyboard and mouse.
For more information abou
Documentation CD or the
Paq utility
The ROMPaq utility enables you to upgrade the system firmware (BIOS). To upgrade the firmware, i
a ROMPaq diskette into the diskette drive or ROMPaq USB Key into an available USB port and boo
system. Online versio
The ROMPaq utility checks the system and provides a choice (if more than one exists) of available
For more information about the ROMPaq utility, see the H
00i Remote Management
The server supports LO100i Remote Man
specific information on the HP website (h
sight Diagnostics
The HP Insight Diagnostics utility displays information about the server
be sure it is operating properly. The utility has online
Diagnostics CD or at the HP website (http://www.hp.
OM-Based Setup Utility
RBSU is a configuration utility embedded in ProLiant ser
activities that can include the following:
• Configuring system devices and
• Enabling and disabling system feature
• Displaying system information
• Selecting the primary
Software and configuration utilities 47