HP ProLiant DL100 Series Server DL100 Series - Manual (Page 84)

• Support new features
• Correct problems in a previous ROM version
The bootable ROMPaq diskette or USB drive key contains all the necessary system files, option ROM
ration files required to upgrade the ROM firmware.
shing the ROM on a small number of servers located in close
ROMPaq utility diskette or USB drive key for each target server. ROMPaq
2. Shut down each target server, and then reboot using the correct ROMPaq diskette or USB drive key
r.
es to be flashed.
After the ROMPaq utility flashes the ROM for the selected devices, cycle power manually to reboot
the operating system.
de delivery method for storage options. Firmware
r Smart Components and Smart Component
For a cumentation or the HP website
Curren m
Auto
ubscriber's Choice (http://www.hp.com/go/subscriberschoice)
ort).
Updating mw
fy the firmware version, use HP Insight Diagnostics (on page 47).
e version on the device.
server, disable BitLocker™ before updating the firmware.
system documentation.
onfiguration.
te is
ROMPaq utility diskette or USB drive key
image files, and the configu
This procedure is most effective when fla
proximity.
To flash the ROM using ROMPaq:
1. Download the system
downloads are available on the HP website (http://www.hp.com/support).
for that serve
3. Follow the interactive session in the ROMPaq utility, and then select the devic
4.
the system back into
Option ROMPaqs have been retired as an upgra
upg ades for storage options are now delivered using
deployment utilities.
dditional information about the ROMPaq utility, see the server do
(http://www.hp.com/support).
t fir ware versions
matic firmware updates
S
Manual firmware updates
Download the latest firmware updates from the HP website (http://www.hp.com/supp
fir are
To veri
To update the firmware:
1. Check the firmwar
2. Determine the latest firmware version available.
3. If a TPM is installed and enabled on the
For more information, see the operating
4. Update the firmware to the current version supported for the hardware c
5. Verify the firmware update by checking the firmware version.
6. If a TPM is installed and enabled on the server, enable BitLocker™ after the firmware upda
complete. For more information, see the operating system documentation.
Troubleshooting 84