HP ProLiant DL100 Series Server DL100 Series - Manual (Page 93)

BSMI notice
Korean notice
Class A equipment
Class B equipment
Laser com
This product rage device (that is, CD or DVD drive) and/or fiber optic
transceiver. E 1 Laser Product in
rdance with US FDA regulations and the IEC 60825-1. The product does not emit hazardous laser
pliance
may be provided with an optical sto
ach of these devices contains a laser that is classified as a Class
acco
radiation.
Each laser product complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser
Notice No. 50, dated May 27, 2001; and with IEC 60825-1:1993/A2:2001.
WARNING: Use of controls or adjustments or pe
specified herein or in the laser product's i
rformance of procedures other than those
nstallation guide may result in hazardous radiation
procedures to the laser device
exposure. To reduce the risk of exposure to hazardous radiation:
• Do not try to open the module enclosure. There are no user-serviceable components inside.
• Do not operate controls, make adjustments, or perform
other than those specified herein.
• Allow only HP Authorized Service technicians to repair the unit.
The Cente
implemented regulations for laser products on August 2, 1976. These regulations apply to laser products
manufactured from August 1, 1976. Compliance is mandatory for products marketed in the United States.
r for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration
Regulatory compliance notices 93