Table 3-5. information logs -29 – HP SureStore 4215w User Manual
Page 83
3-29
Operating the Library
Retrieving Performance Information
L
ibrary
O
perat
io
n
Table 3-5
Information Logs
Log Name
Description
REVISION
Displays the library’s firmware revision number.
LIB
ODOMETERS
*
Press
ENTER
to select the odometer logs.
HOURS
#
Number of operation hours (time during which power was
on). Some time may have been spent in power reduction
mode.
MOVES
#
Total number of moves and move attempts by the
cartridge transport mechanism.
XLATES
#
Total number of cartridge transport mechanism horizontal
moves.
DRIVE
LOADS
*
Press
ENTER
to select the logs described in the next few rows.
DRIVE
1
Number of tape cartridge loads for drive 1.
DRIVE
2
Number of tape cartridge loads for drive 2 (two drive
library only).
DRIVE
FW
*
Press
ENTER
to select the firmware revision of the drive you want to see.
D1
REVISION
#
Firmware revision of drive 1.
D2
REVISION
#
Firmware revision of drive 2 (two drive library only).
INTERFACE
FW
*
Press
ENTER
to select the Interface board revision.
BUS NUM =
Press
NEXT
or
PREV
to display the interface bus number to
select, then view:
FAST WIDE
SCSI
Displays the interface type.
8052
Rev #
Displays the 8052 firmware.
8052 CKSUM #
Displays the 8052 checksum revision.
COBRA REV#
Displays the revision of the interface chip (Cobra).