HP SureStore 4215w - Manual (Page 60)

3-6
Operating the Library
Understanding Display Window Messages
Control Panel Options
Press PREV or NEXT while the library is in the “ready” state to display first-level
options. Access second-level options from ADMIN * (second level options require a
password; see “Entering the Administration Menu Password” on page 3-9).
An asterisk (*) indicates that the option has multiple selections.
When a menu selection is flashing, press ENTER to select the option or display the
option’s selections. Press PREV or NEXT to display other available options.
First Level Options
RELEASE DOOR Select to allow the access door to be unlocked.
VIEW BAR
CODES *
Select to view the bar code labels on each tape cartridge
by slot number.
ADMIN * Accesses second-level options.
LOAD DRIVE * Loads a tape from a slot to the drive. To load a tape:
1. Select the drive that you want to load a tape into.
2. Select the tape that you want to load. The control
panel displays the barcode number and slot number.
Press
PREV or NEXT to select, then ENTER .
3. The control panel displays the drive it is loading to.
TAPE LOADED displays when complete.
UNLOAD DRIVE * Unloads a tape from the drive to the slot it came from.
1. Press PREV or NEXT to select the drive that you want
to unload. Press ENTER . If a tape is not in the drive,
SOURCE IS EMPTY displays.
2. The activity light flashes green and TAPE
UNLOADED flashes when complete.