HP TC2120 - Manual (Page 86)

80
This chapter describes the removal and replacement procedures for the user serviceable components in the
hp server tc2120.
Safety Information
Follow the procedures listed below to ensure safe handling of components and to prevent harm to both you and
the server:
• Use an anti-static wrist strap and a grounding mat, such as those included in the Electrically Conductive
Field Service Grounding Kit (HP 9300-1155).
• Handle accessory boards and components by the edges only. Do not touch any metal-edge connectors or
any electrical components on accessory boards.
• Do not wear clothing subject to static charge build-up, such as wool or synthetic materials.
Service Tools Required
Service of this product may require one or more of the following tools
• Electrically Conductive Field Service Grounding Kit (P/N 9300-1155)
• CE Peripheral Exerciser Disk Kit (45935-63210)
• Datacomm Test Hood, 9-pin (24540-60010)
• Datacomm Test Hood, 25-pin parallel (24540-60011)
• 1/4 inch Flat Blade Screwdriver
• T-15 Torx
® Screwdriver
7 Replacing Parts
NOTE The hp server tc2120 is highly customer serviceable. All
major parts are easily accessible and replaceable.
WARNING Hazardous voltages are present inside the server. Always
remove AC power from the processor and other associated
assemblies while working inside the unit. Serious injury may
result if this warning is not observed.