Monitor, keyboard, mouse, and lan – HP TC2120 User Manual
Page 48
42
Chapter 3
Installing and Configuring
Monitor, Keyboard, Mouse, and LAN
1. Place the monitor, keyboard, and mouse near the hp server and connect these devices to the server using the
connections provided on the rear of the chassis. See
.
The connectors are color-coded for easy matching.
2. If a LAN cable is provided, you may connect it now, or wait until you have verified the server’s operation.
3. Check the input voltage selector to ensure that you have the correct input voltage selected.
Figure 3-24. Rear Panel Ports
NOTE
If you have a console switch box, refer to the switch box’s
user guide for instructions on connecting the keyboard,
mouse, and monitor.
CAUTION
The keyboard and mouse ports are both PS/2 ports, but are not
interchangeable. If you plug the keyboard into the mouse port,
or the mouse into the keyboard port, you will get an error
message.
CAUTION
To prevent possible damage to the hp server’s power supply,
set the input voltage selector to the correct input voltage.
Power
Input Voltage
Switch
Keyboard
USB (2)
Serial
Cover Lock
Mouse
System Fan
LAN
Parallel
Video